Blue Lotus 360

ARTICLE

VAT Domestic Reverse Charge for Construction: A Worked Guide

TL;DR

  • Since 1 March 2021, many building and construction services between VAT-registered businesses use the domestic reverse charge: the customer accounts for the VAT, not the supplier.
  • It applies to standard and reduced-rated services reported under CIS, where the customer is VAT-registered and isn’t an end user or intermediary supplier.
  • The supplier’s invoice shows the VAT but doesn’t charge it, and must say the reverse charge applies.
  • Most mistakes come from getting the end user status wrong, so ask for written confirmation and set VAT codes per customer in your accounts.

What is the VAT domestic reverse charge?

The VAT domestic reverse charge for construction is a rule that moves responsibility for paying VAT from the supplier to the customer. Instead of the subcontractor charging VAT and paying it to HMRC, the main contractor works out the VAT on the invoice, pays it to HMRC through their own VAT return, and reclaims it in the same return where allowed.

HMRC introduced it on 1 March 2021 to tackle missing trader fraud, where VAT was charged and collected but never paid over. The detailed rules are in HMRC’s VAT reverse charge technical guide.

When does it apply?

The reverse charge applies when all of these are true:

  1. The supply is a building or construction service at the standard (20%) or reduced (5%) rate.
  2. The service is one that must be reported under the Construction Industry Scheme (CIS).
  3. The supplier and the customer are both VAT-registered.
  4. The customer is registered for CIS.
  5. The customer isn’t an end user or intermediary supplier.

It doesn’t apply to zero-rated work, such as most new-build housing, or to supplies to customers who aren’t VAT or CIS registered.

End users and intermediary suppliers

This is where most of the confusion sits.

  • An end user is a VAT and CIS registered business that receives construction services but doesn’t sell them on as construction services. A property developer or a landlord commissioning work on its own building is a common example.
  • An intermediary supplier is a business connected to an end user, such as a company in the same group, that passes the services on without adding further work.

Supplies to end users and intermediaries are charged normal VAT. The customer should confirm its status to the supplier in writing. If you’re a subcontractor, don’t guess: get that confirmation before you invoice.

The 5% disregard

If a supply mixes reverse charge services with other items, and the reverse charge element is 5% or less of the total value, you can treat the whole supply as normal VAT. It’s there to save businesses from splitting invoices over trivial amounts.

Worked example: subcontractor to main contractor

A VAT-registered electrical subcontractor carries out £20,000 of standard-rated installation work for a main contractor on a commercial fit-out. Both are VAT and CIS registered, and the main contractor will sell the work on to its client.

On the subcontractor’s invoice:

LineAmount
Electrical installation works£20,000.00
VAT at 20% (reverse charge)£4,000.00 shown, not charged
Amount due£20,000.00
Wording“Reverse charge: customer to account for VAT to HMRC”

In the main contractor’s VAT return:

BoxEntry
Box 1 (output VAT)£4,000
Box 4 (input VAT)£4,000, if fully recoverable
Box 7 (purchases)£20,000
Net VAT effectNil

In the subcontractor’s VAT return: the £20,000 goes in Box 6 (sales), with nothing in Box 1 for this supply.

CIS still applies separately. The main contractor deducts CIS from the labour element of the payment and reports it to HMRC as usual. The reverse charge changes VAT only.

How it affects cash flow

For subcontractors, the reverse charge removes the VAT they used to collect and hold until their VAT return was due. Many moved to monthly VAT returns so reclaims on their own purchases come back faster. For main contractors, the effect is usually neutral because the VAT is declared and reclaimed in the same return.

Mistakes HMRC sees most often

  1. Wrong end user status. Charging normal VAT to a contractor, or reverse charging an end user.
  2. Missing invoice wording. The invoice must make clear the reverse charge applies.
  3. Charging VAT anyway. If VAT is charged in error, the customer can’t simply reclaim it. The invoice needs correcting.
  4. Forgetting Box 1. Main contractors must declare the output VAT, not just reclaim input VAT.
  5. Mixing it up with zero-rating. Zero-rated new-build work isn’t reverse charged.

Setting it up in your accounts system

The reverse charge is easy to get wrong when VAT codes are chosen by hand on each invoice. Build it into your system instead:

  • Record each customer’s end user or contractor status, with the written confirmation attached.
  • Use a dedicated reverse charge VAT code, so invoices print the right wording automatically.
  • Make sure purchase invoices from subcontractors post the output and input VAT correctly.
  • Keep CIS deductions and the reverse charge in the same system, so payments and returns agree.

Blue Lotus 360 combines construction project management, quantity surveying, procurement and finance in one ERP, so customer status, VAT treatment and CIS deductions live alongside the job they belong to. See our construction ERP page for more.

Getting the reverse charge right

The domestic reverse charge isn’t complicated once you’ve answered one question for every customer: are they an end user or not? Get that confirmed in writing, set the right VAT codes, and the invoices and returns follow.

Book a demo to see VAT, CIS and project costs working together in Blue Lotus 360.

This article is general information, not tax advice. Check HMRC guidance or speak to your accountant for your situation.

FAQs

What is the domestic reverse charge in construction?

It’s a VAT rule, in place since 1 March 2021, where the customer rather than the supplier accounts for VAT on certain building and construction services reported under CIS.

Who has to use the reverse charge?

VAT-registered suppliers of standard or reduced-rated CIS services to VAT and CIS registered customers who aren’t end users or intermediary suppliers.

What should a reverse charge invoice say?

It should show the VAT rate and amount but not charge it, and include wording making clear the customer must account for the VAT to HMRC.

Does the reverse charge apply to end users?

No. Supplies to end users and intermediary suppliers are charged normal VAT. The customer should confirm its status in writing.

Does the reverse charge replace CIS?

No. CIS deductions still apply. The reverse charge only changes who accounts for VAT.

Want the same success? Experience the full potential of
BlueLotus 360.

Want the same success? Experience the full potential of
BlueLotus 360.

Table of Contents

Featured Articles

Get Your Free Demo

Experience the power of our ERP solution firsthand.

Get Your Free Demo Popup Form